Choose from our large variety of Deep Sea Control Panels
|
|
|
|
|
All Deap Sea Products |
|
|
|
|
|
| The module includes includes a backlit LCD display which clearly shows the status of the engine at all times. It will monitor frequency, voltage, current, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning and shutdown status of the engine. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module includes includes a backlit LCD display which clearly shows the status of the engine at all times. It will monitor frequency, voltage, current, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning and shutdown status of the engine. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module has also been designed to display the warning and shutdown status of the engine. The module includes six digital inputs, three analogue inputs and six outputs. Two of the outputs are configurable on the magnetic pick-up version and all six are configurable on the Canbus version. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module has been designed to show the warning and shutdown status of the engine. The module includes six digital inputs, three analogue inputs and six outputs. Two of the outputs are configurable on the magnetic pick-up version and all six are configurable on the Canbus version. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The Generator Controller displays fault conditions on the LCD display and via the LED indicators on the front. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
SE5120 |
| The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The Generator Control module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The Generator Control module displays fault conditions on the LCD display and via the LED indicators on the front of the panel. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front of the panel ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
DSE5310 |
| The Generator Controller displays fault conditions on the LCD display and via the LED indicators on the front of the panel.
The Generator Control module also includes RS232 and RS485 communication capabilities for linking to a PC, sending SMS messages and interfacing with new and existing building management systems. ...Continue >> |
| |
|
US$762.00
|
|
| Not available in stock
|
|
|
|
|
|
|
| The DSE7110 has been designed to start and stop diesel and gas generating sets that include electronic and non-electronic engines..
The module is simple to operate and features a user-friendly menu layout for improved clarity. Enhanced features include a real time clock for improved event logging and a 132 x 64 pixel LCD display. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front of the panel. The module includes RS232 or RS485 communication capabilities for linking to a PC, sending SMS messages and interfacing with new and existing building management systems. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| DSE7120 is an Auto Mains (Utility) Failure Control Module and includes the capability of being able to monitor a mains (utility) supply. The module has been designed to start and stop diesel and gas generating sets that include electronic and non-electronic engines.
The module is simple to operate and features a user friendly menu layout for improved clarity. Enhanced features include a real time clock for improved event monitoring and a 132 x 64 pixel LCD display. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The Generator Controller is simple to operate and features a user-friendly menu layout for improved clarity. Enhanced features include a real time clock for improved event and performance monitoring, the ability to display any language on screen and a 132 x 64 pixel LCD display. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module has the capability of being able to monitor a mains (utility) supply. Modules are simple to operate and feature a user-friendly menu layout for improved clarity. Enhanced features include a real time clock for improved event and performance monitoring, the ability to display any language on screen and a 132 x 64 pixel LCD display. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
|
|
|
| The module includes USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for expansion device connectivity. The modules are simple to operate and feature a simple menu layout for improved clarity. Enhanced features include a real time clock for enhanced event and performance monitoring, Ethernet communications for low cost monitoring, dual mutual standby to reduce engine wear and tear, and preventative maintenance features to detect engine part faults prior to a major problem occurring. ...Continue >> |
| |
|
|
|
| Not available in stock
|
|
|
|
View Cart
Hablamos Español 
